Home / Blog / How-To
AirPods Care

Wet AirPods: What to Do, What to Avoid and Why Water Eject Is Different

Illustration of wet AirPods with water drops, titled “Wet AirPods”

Wipe wet AirPods with a soft dry cloth, keep them out of the case until they are dry, and do not use heat, air or anything pushed into the mesh.

A sweaty run, a rainy walk, a pocket that went through the washing machine. Wet AirPods are a common worry, and the right response depends on how wet they got and which model you have.

This guide covers the safe way to dry them, what to avoid, and why the water eject sounds you might use on an iPhone speaker are a different thing entirely.

How water resistant are AirPods?

Some AirPods models are rated IP54, which covers sweat and water resistance for activities like workouts and light rain. Check Apple's specifications for your own model, because ratings differ between generations.

That rating means water resistant, not waterproof. Apple notes that AirPods are not designed for water sports, showering or swimming, and that resistance can decrease over time. The charging case is generally not water resistant at all.

What to do straight away

  1. Take them out of your ears and stop playing audio.
  2. Wipe them with a soft, dry, lint-free cloth.
  3. Keep them out of the charging case until they are completely dry. Putting wet AirPods into the case can let moisture reach the charging contacts.
  4. Let them air dry somewhere at room temperature with some airflow.

If they were exposed to anything other than plain water, such as soap, sweat build-up or a drink, Apple's cleaning guidance for AirPods is the place to check before rinsing anything.

How to tell when they are dry

There is no indicator that tells you AirPods are dry, so judge it by time and touch. After a light splash, an hour or two at room temperature is often enough. After a soaking, such as a trip through the washing machine, leave them for a full day or more before putting them back in the case.

Look closely at the mesh and the stem. If you can still see droplets or a damp sheen, wait longer. When you do put them back, check that they connect normally and that both sides play at the same level before relying on them again.

If the case got wet

Wipe the case with a dry, lint-free cloth and leave it open to dry with the lid up. Do not charge it until it is fully dry. Pay attention to the charging contacts inside the case and the port underneath, where water likes to collect, and wipe them gently with the cloth rather than anything pointed.

What not to do

Do not use a hair dryer or any heat source, compressed air, or anything sharp or pointed in the speaker mesh or microphone openings. Do not put them in rice. And do not run them under a tap to wash out a spill. Gentle wiping and patience are what work.

Follow along in Get SonicGuard on the App Store

Free on the App Store for iPhone and iPad.

Download on the
App Store

Why phone water eject sounds are different

Water eject apps like SonicGuard are designed for the iPhone's own built-in speaker. They play low-frequency sounds through that speaker, and they ask you to disconnect headphones and external speakers first.

There are a few reasons this does not carry over to AirPods:

  • AirPods drivers are tiny and sit right next to your ear canal. Strong low tones played through them are not something to try in your ears.
  • If AirPods are connected, the sound goes to them instead of the phone speaker, which defeats the point of the session.
  • AirPods are designed to be dried by wiping and air, not by sound.

So if your AirPods are wet, dry them the gentle way. If your iPhone got wet at the same time, disconnect the AirPods first and then use a water eject session on the phone speaker.

If they sound muffled after drying

Muffled AirPods after getting wet are usually caused by moisture or debris in the speaker mesh. Give them a full day to dry. Then clean the mesh gently with a dry, soft-bristled brush, following Apple's cleaning guidance.

If they still sound wrong, check a few settings:

  • Reset them by placing them in the case, closing the lid, then following Apple's reset steps for your model.
  • Check the audio balance in Settings, Accessibility, Audio and Visual.
  • Test with a different device to rule out the phone.
  • Make sure both AirPods are updated, which happens automatically when they are charging near a connected iPhone.

If one AirPod is still quiet or silent, contact Apple Support. Water damage is generally not covered by the standard warranty, but they can advise on options.

Testing the iPhone side

If you are not sure whether the problem is your AirPods or your phone, it helps to check the phone on its own. Disconnect the AirPods and run a speaker test on the iPhone. SonicGuard includes left, right and stereo checks and bass, mid and treble tones, so you can tell whether the phone speaker is fine. If it is, the problem is with the AirPods.

Quick answers

Can I use a water eject app on AirPods?

No. Water eject apps are designed for the iPhone's built-in speaker. Dry AirPods with a soft cloth and air instead.

How long should wet AirPods dry before going back in the case?

Until they are completely dry. Give them several hours, or longer if they were soaked.

Are AirPods waterproof?

No. Some models are sweat and water resistant, but they are not designed for swimming or showering.

Should I put wet AirPods in rice?

No. Rice can leave dust and particles behind. Air drying at room temperature is safer.

Where to get it

SonicGuard is for your iPhone's built-in speaker, with four water eject programmes and speaker checks that work offline and without the microphone. Get SonicGuard on the App Store for iPhone.

Wipe the AirPods, open the case, and let time do the drying.

Get Get SonicGuard on the App Store free

Free to download on the App Store — wallpapers, keyboards, AI photo tools and more.

Download on the
App Store